1. Check whether the power supply is in good condition. Check whether the ultrasonic generator is powered in. If there is no display on the panel, check whether there is a problem with the incoming power supply.

2、超聲波發生器后面的保險絲或線路板上的保險絲是否燒掉。

2. Whether the fuse behind the ultrasonic generator or the fuse on the circuit board is burnt.

3、超聲波換能器經過長期高溫清洗，可能有脫膠或者膠水開裂現象。

3. After long-term high-temperature cleaning, the ultrasonic transducer may have degumming or glue cracking.

4、超聲波清洗機的使用壽命過長，導致超聲波換能器已經老化，需要更換全新換能器。

4. The service life of the ultrasonic cleaner is too long, which leads to the aging of the ultrasonic transducer, which needs to be replaced with a new one.

5、超聲波發生器灰塵過多，或受潮，導致一些電路不暢，需清理超聲波發生器內部。

5. The ultrasonic generator has too much dust or is affected with damp, which causes some circuits to be blocked, so it is necessary to clean the interior of the ultrasonic generator.

超聲波清洗機震動小的5大原因：

Five reasons for low vibration of ultrasonic cleaning machine:

1、使用時間比較長，換能器老化，性能衰減，維修方法可以適當增大超聲波功率，但是這種方法會造成換能器的發熱量增大，不能根本解決問題，建議更換全部換能器。

1. The use time is relatively long, the transducer is aged, the performance is degraded, and the maintenance method can appropriately increase the ultrasonic power, but this method will increase the heat of the transducer, which cannot fundamentally solve the problem. It is recommended to replace all transducers.

2、部分換能器損壞，將壞的換能器更換于之匹配的換能器。

2. If some transducers are damaged, replace the damaged transducers with the matching transducers.

3、超聲波發生器與換能器頻率點跑偏。

3. The frequency points of ultrasonic generator and transducer deviate.

4、清洗機工作環境，比如清洗劑種類，清洗溫度，液位深淺等的影響。

4. The influence of the working environment of the cleaning machine, such as the type of cleaning agent, cleaning temperature, liquid level depth, etc.

5 、被清洗物的擺放方式，清洗劑的更換等。

5. The placement method of the cleaned objects, the replacement of the cleaning agent, etc.

以上的精彩內容來自：超聲波清洗機為您提供，更多的精彩內容請點擊進入我們的網站：http://m.pvc-powder.com

The above highlights come from: ultrasonic cleaning machine is provided for you. For more highlights, please click to enter our website: http://m.pvc-powder.com