全自動硅片插片清洗機是專為全自動清洗硅片設計的,通過一臺自動插片機自動插片，插片后采用一臺機械手將插片后的花籃（100片/籃）送入清洗機清洗，清洗結束后采用一臺工業機器人將花籃送到自動檢片機上料位，檢片結束后機器人將空花籃放到花籃輸送機構，花籃輸送機構將空花籃送到插片機機上料端，工人操作只需保證插片機上料槽內有硅片即可。清洗機生產主線共11個工位，其工作原理是利用超聲波滲透力強的機械振動沖擊硅片表面并結合清洗劑的化學去污作用達到對硅片表面附著的碳化硅、硅粉、金屬粉末、油污、懸浮液等雜質的清除，從而獲得表面潔凈的硅片。本設備電氣控制部分關鍵件均采用進口優質件，性能可靠，使用壽命長，具有工位記憶功能，單臂小車運行平穩，動作迅速、可靠；頂部設有吸風口，為防止污染空氣，用戶需外接風管抽風。

The fully automatic silicon wafer insertion cleaning machine is designed specifically for fully automatic cleaning of silicon wafers. It uses an automatic insertion machine to automatically insert wafers. After insertion, a mechanical arm is used to send the inserted flower basket (100 wafers/basket) into the cleaning machine for cleaning. After cleaning, an industrial robot is used to send the flower basket to the feeding position of the automatic wafer inspection machine. After the inspection is completed, the robot places the empty flower basket into the flower basket conveying mechanism, The flower basket conveying mechanism sends the empty flower basket to the feeding end of the insertion machine, and workers only need to ensure that there are silicon wafers in the feeding groove of the insertion machine. The main production line of the cleaning machine consists of 11 workstations. Its working principle is to use the strong mechanical vibration of ultrasonic penetration to impact the surface of silicon wafers and combine it with the chemical cleaning effect of cleaning agents to remove impurities such as silicon carbide, silicon powder, metal powder, oil stains, suspension, etc. attached to the surface of silicon wafers, thereby obtaining a clean surface of silicon wafers. The key components of the electrical control part of this equipment are all imported high-quality components, with reliable performance, long service life, and station memory function. The single arm trolley runs smoothly, moves quickly, and is reliable; There is a suction port at the top, and to prevent air pollution, users need to connect an external air duct for ventilation.

清洗流程：上料臺→ 1#超聲波鼓泡槽（電加熱+溫控+過濾）→2#超聲波堿洗槽（電加熱+溫控+過濾）→3#超聲波堿洗槽（電加熱+溫控+過濾）→4#超聲波堿洗槽（電加熱+溫控+過濾）→5#超聲波漂洗槽（電加熱+溫控+過濾）→6#超聲波漂洗槽（電加熱+溫控+過濾）→7#超聲波漂洗槽（電加熱+溫控+過濾）→8#超聲波漂洗槽（電加熱+溫控+過濾）→9#慢拉脫水槽→10#烘干槽→11#冷風吹干槽→出料機構

Cleaning process: Loading table → 1 # ultrasonic bubbling tank (electric heating+temperature control+filtration) → 2 # ultrasonic alkali washing tank (electric heating+temperature control+filtration) → 3 # ultrasonic alkali washing tank (electric heating+temperature control+filtration) → 4 # ultrasonic alkali washing tank (electric heating+temperature control+filtration) → 5 # ultrasonic rinsing tank (electric heating+temperature control+filtration) → 6 # ultrasonic rinsing tank (electric heating+temperature control+filtration) → 7 # ultrasonic rinsing tank (electric heating+temperature control+filtration) → 8 # ultrasonic rinsing tank (electric heating+temperature control+filtration) → 9 # slow pulling water tank → 10 # drying tank → 11 # cold air drying tank → discharge mechanism

超聲波清洗機是利用超聲波空化的原理，當超聲波形成的氣泡突然破裂的瞬間產生1000個大氣壓，產生強烈的沖擊波代替人手工搓洗，使被清洗物體表面的污物遭到破壞，并迅速脫落，因為超聲波可以穿透固體物質而使整個液體介質振動并產生空化氣泡，因此這種清洗方式不存在清洗死角，實踐證明，超聲波清洗的潔凈度高。

Ultrasonic cleaning machine is based on the principle of ultrasonic cavitation. When the bubbles formed by ultrasonic waves suddenly burst, 1000 atmospheres of pressure are generated, generating a strong shock wave to replace manual scrubbing. This causes the dirt on the surface of the cleaned object to be damaged and quickly fall off, because ultrasonic waves can penetrate solid substances and cause the entire liquid medium to vibrate and produce cavitation bubbles. Therefore, this cleaning method does not have a dead angle for cleaning. Practice has proven that, The cleanliness of ultrasonic cleaning is high.

由于超聲波的能夠穿透細微的隙縫和小孔，所以超聲波可以適合不規則形狀的器皿進行清洗。

Due to its ability to penetrate fine gaps and small holes, ultrasound can be suitable for cleaning irregularly shaped vessels.

超聲清洗相對常規清洗方法在除垢方面要快得多，超聲清洗可節省勞動力的優點，使其成為經濟的清洗方式。

Ultrasonic cleaning is much faster in descaling compared to conventional cleaning methods, and its advantage of saving labor makes it an economical cleaning method.

無論清洗對象是大是小，簡單還是復雜，使用超聲波清洗都可以獲得比手工清洗更高的潔凈度。應用優勢，在所有的清洗方式中，吉創超聲波清洗是效率高，效果好的一種，之所以超聲波能夠達到如此的效果，是與它的工作原理和清洗方式密切相關的，清洗效果好且塊，省時省力省人工。

Regardless of whether the cleaning object is large or small, simple or complex, using ultrasonic cleaning can achieve higher cleanliness than manual cleaning. Application advantages: Among all cleaning methods, Jichuang ultrasonic cleaning is a highly efficient and effective one. The reason why ultrasonic cleaning can achieve such results is closely related to its working principle and cleaning method. The cleaning effect is good and blocky, saving time, effort, and labor.

感謝您的閱讀，此文的文章來源：全自動超聲波清洗機更多的內容和問題請點擊：http://m.pvc-powder.com 我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. The source of this article is: Fully automatic ultrasonic cleaning machine. For more information and questions, please click: http://m.pvc-powder.com We will continue to work hard to provide you with services. Thank you for your support!