In the electromechanical industry, there are cleaning requirements from mechanical parts to mechanical parts, from electrical parts to electrical parts, such as gears, crankshafts and even gearboxes, as well as mechanical and electrical assemblies on electrical parts, as well as some precision mechanical parts and electrical parts, which are inseparable from cleaning. Most enterprises adopt traditional cleaning methods, such as infiltration cleaning and spray cleaning. This cleaning method is not only labor-intensive, but also easy to cause environmental pollution and waste of water resources. At present, many enterprises begin to carry out technical transformation and adopt ultrasonic cleaning to eliminate the disadvantages of traditional cleaning, especially some mechanical parts with complex shapes, which are powerless by traditional cleaning.

超聲波清洗在輕紡行業中的應用

Application of ultrasonic cleaning in light textile industry

輕工行業，如空調、冷柜、冰箱中的壓縮機；鐘表零件、手表元件等；紡織行業，如精密紡織器材、噴絲嘴等；珠寶行業，如金銀首飾、珠寶玉器等，都需要清洗，有些零件、部件和組件，如壓縮機、噴絲嘴等或形狀復雜，或盲孔、微孔，只能由超聲波清洗，有些規模生產廠甚至采用超聲波鏈式或升降式成套設備。

Light industry, such as compressors in air conditioners, freezers and refrigerators; Watch parts, watch components, etc; Textile industry, such as precision textile equipment, spinneret, etc; The jewelry industry, such as gold and silver jewelry, jewelry and jade, needs cleaning. Some parts, components and components, such as compressors and spinnerets, have complex shapes, or blind holes and micropores, which can only be cleaned by ultrasonic. Some large-scale production plants even use ultrasonic chain or lifting complete sets of equipment.

超聲波清洗在表面處理行業的應用

Application of ultrasonic cleaning in surface treatment industry

表面處理是輕工行業的組成部分，包含機械零件電鍍、金屬和非金屬機箱柜涂覆、光學玻璃或鏡片鍍膜等，電鍍前后或涂覆前的清洗采用超聲波清洗技術已成為一種新的典型工藝，特別是軍工電子產品中的一些多芯插座，因質量要求必須進行電鍍，而電鍍后其質量要求多芯之間必須絕緣，往往因電鍍后致使多芯間不絕緣，采用丙酮、酒精等方法浸潤清洗后測試其阻值要求無窮大，但達不到質量要求，而采用超聲波清洗，經烘干后，則完全達到質量要求。將超聲波直接引入電鍍還可提高鍍液的勻度和鍍層的密度。

Surface treatment is an integral part of the light industry, including electroplating of mechanical parts, coating of metal and non-metal chassis and cabinets, coating of optical glass or lens, etc. ultrasonic cleaning technology has become a new typical process before and after electroplating or before coating. In particular, some multi-core sockets in military electronic products must be electroplated due to quality requirements, and after electroplating, the quality requires that the multi-core must be insulated, The multi-core is often not insulated after electroplating. The resistance value is required to be infinite after immersion cleaning with acetone, alcohol and other methods, but it can not meet the quality requirements. However, ultrasonic cleaning can fully meet the quality requirements after drying. The direct introduction of ultrasonic wave into electroplating can also improve the uniformity of plating solution and the density of coating.

超聲波清洗在軍事裝備領域的應用

Application of ultrasonic cleaning in military equipment field

軍事裝備不外乎光、機、電類裝備或光、機、電一體化裝備，軍事裝備在儲備狀態下，儲存于軍事倉庫，這些裝備在儲備、訓練、演習狀態均免不了塵埃、污垢的吸附、污染，特別是一些復雜的兵器裝備靠人工擦拭保養，難度較大，而一旦采用超聲波清洗技術保養兵器裝備，問題就迎刃而解

Military equipment is nothing more than optical, mechanical and electrical equipment or optical, mechanical and electrical integrated equipment. When military equipment is in reserve, it is stored in military warehouses. These equipment can not avoid the adsorption and pollution of dust and dirt in reserve, training and exercise. In particular, some complex weapons and equipment are difficult to maintain by manual wiping. Once ultrasonic cleaning technology is used to maintain weapons and equipment, the problem will be solved

超聲波清洗機設備專注行業發展十幾年，真誠服務顧客,專注客戶需求,您有不明確的內容可點擊網站進行詳細了解：http://m.pvc-powder.com

Ultrasonic cleaning machine equipment has focused on the development of the industry for more than ten years, sincerely serving customers and focusing on customer needs. If you have unclear content, you can click the website to learn more: http://m.pvc-powder.com